Precautions for using the motor in corn processing equipment
Precautions for using the motor in corn processing equipment
Precautions for the use of the engine of corn deep processing equipment. To ensure the function and performance of the engine as usual, it is necessary to strengthen the maintenance and maintenance work. First, before working, check whether the appearance is abnormal. In fact, listen to whether the sound is abnormal when working, and then touch it with your hand to feel whether there is abnormal heating. The problems that arise during the work of the engine in grain processing equipment will be manifested in all aspects.
It is normal for the engine to have sound when it is running, and it can be adjusted if there are some minor abnormalities. However, there is a situation that requires special attention, that is, when the engine is running, there is a large metal part crashing sound, which indicates the internal Some parts are out of fixation or there is a large gap between some parts, which is not in accordance with the normal situation. At this time, the machine must be shut down immediately, otherwise it will cause the connecting rod to penetrate the cylinder, causing serious consequences of scrapping.
When the engine temperature is too high, do not turn off the engine immediately, but slowly follow the process step by step, otherwise it will cause the engine "sticky cylinder" accident, which will seriously affect the normal operation of the engine and shorten the service life of the engine;
When the engine temperature is too low, remember that it cannot run at a high speed. You should run at a low speed and then increase the speed slowly, otherwise it will accelerate the wear of the engine and will seriously affect the service life of the engine.
Therefore, maintaining the motor is also a very important daily task for the grain processing plant.Each corn processing equipment and rice processing equipment has a specific power and is equipped with a specific motor. Before buying, please make it sure by asking the manufacturer carefully
