Emergency plan when corn processing machinery is blocked
Emergency plan when corn processing machinery is blocked
Blockage is a common problem in the production of corn processing machinery, which makes the staff very headache, because the blockage not only affects the quality of corn processing products, reduces production efficiency, but also damages the parts of the equipment, causing potential safety hazards. So what is the emergency plan when the corn milling machinery is blocked?
Reason 1: The speed of adding materials is too fast
Each equipment has a certain operating speed. If the feeding speed is accelerated in order to increase the processing volume and the processing speed is constant, the grinding may be impermeable because the feeding is too fast, which will easily lead to equipment failure. clogged, there is a phenomenon of non-operation. Therefore, in production, it is necessary to reasonably grasp the feeding speed and operate according to the corn milling process.
Reason 2: The moisture content of raw grains is high
When the moisture content of the raw corn grain is high, it is easy to adhere to the maize milling equipment pipes or sieve holes during production, and then blockage occurs. In order to ensure that the water content in the corn meets the technological requirements of the corn processing machinery, when adjusting the water content of the raw grain, the operator needs to reasonably grasp the time of moistening the wheat and the amount of water added, and try to make the water content of the raw corn grain meet the production standard. For corn raw grains with high water content, the raw grains can be dried to reduce their water content, and processed when appropriate, so as to avoid clogging and affect production efficiency. The condition of the raw grain will greatly affect the post-processing situation. Only when the moisture and impurities of the raw grain are properly handled in the early stage, the post-processing procedure will be carried out more smoothly.